Esta em: Inicio > Pedais > Pedais y calas de montanha
Sobre o produto de Look Quartz Carbon Ti 2011
Look Quartz Carbon Ti 2011:
- USE: MTB LEISURE TO COMPETITION
- BODY: INJECTED CARBON
- AXLE: TITANIUM OVERSIZED
- THREADS: 9/16 X 20 MM
- BEARING: S2 CARTRIDGE BEARINGS, 1 NEEDLE BEARING
- SEAL: S1 LIP SEAL + 1 SEAL ON BEARINGS
- HEIGHT: AXLE / SOLE 12,5 MM (CLEATS)
- DISTANCE: PEDAL AXLE / CRANKSET 53 MM
- MULTITENSOR: NO
- CLEATS: QUARTZ CLEATS
- ANGULAR PLAY: ± 3°
- LATERAL PLAY: ± 1,5MM
- PEDAL WEIGHT: 120 G (278 G PER PAIR WITH CLEATS AND MOUNTING BOLTS)
- COLOR: BODY BLACK AND RED
- ACCESSORIES: SOLD WITH 1 PAIR OF 15° CLEATS, 1 PAIR OF 20° CLEATS, ASSORTED FITTING SPACERS AND 4 BOLTS
- WARRANTY: 2 YEAR
- 2009 EVOLUTION - ENTRY / RELEASE
The new QUARTZ MTB pedals are equipped with an all new retention spring that allows firmer cleat entry-release.
The technical concept is the same proven system as the 2008 pedals but the retention spring material has been improved.
Its lightweight, simple and an excellent performer.
Quartz MTB pedals are known to be one of the best pedals on the market for cleat support, mud evacuation, lightness, and longevity.
The new QUARTZ MTB pedal delivers better cleat engagement and support in the most demanding marathon and CX conditions.
- MUD EVACUATION
The simplicity and design of this pedal with its open area between the pedal body and retention spring allows excellent mud evacuation in the worst climatic conditions.
- LARGE SUPPORT AREA
The large support area between the shoe cleats and the platform on the shoe make the QUARTZ a stable and efficient performer.
Adjusting washers of .5mm, 1mm and 2mm are delivered with the pedals to assure optimum contact with different shoe models.
- WEIGHT: 120 G
QUARTZ Carbon TI is one of the the lightest pedals on the market.
- INJECTED CARBON BODY
The injected carbon body saves weight and delivers excellent mechanical performance.
- AXLE BEARING SYSTEM / TI AXLE
- The QUARTZ Carbon TI is equipped with a very light oversized titanium axle. 2 micro cartridge bearings and one needle cartridge bearing.
- Reinforced seals protect the bearings in extreme use. The cartridge bearings have seals on the exterior of the cartridge.
- TI axles save weight without compromising strength. Look axles are approved after a rotational test of a million eccentric (which creates a shock during each revolution) cycles at 100 rpm with 90kg loaded on the center of the axle. This is well beyond the required EN14781 test of 100,000 cycles at a 65kg load.
Clientes que han comprado este producto tambien han comprado Look Quartz Carbon Ti 2011
Produtos similares a Look Quartz Carbon Ti 2011
COMENTE
Product
Product team
COMPRAR POR
Categorías
Marcas
