Campagnolo Chorus Eps Interface

A tiny electronic component that performs an extremely important job.
The interface transforms the analogue signals received from the controls into the digital signals transmitted to the EPS™ Power Unit™.
But thats not all it does. It is also used to sets the initial configuration and adjust drivetrain settings during a race, as well as displaying battery level.A vital component for the electronic drivetrain, it may be installed on the handlebar mount or on the brake cables.


Features & Benefits:

- ANALOGUE-DIGITAL SIGNAL CONVERSION Transforms the analogue signals received from the controls into the digital signals transmitted to the Power Unit.

- ´ZERO SETTING´ AND ´RIDING SETTING´ Used to set the initial configuration of the components and make fine adjustments during a race.

- RGB LED:Visualises battery charge status.

- TWO POSSIBLE INTERFACE MOUNTING OPTIONS The unique design of the interface lets the user choose whether to install it on the brake cable or on the handlebar mount.


Specifications:

- Weight: 24 gr.


Technologies:

- Riding Settings :The client can adjust the reference position of the rear derailleur and/or derailleur using the adjustment procedure known as Riding Setting. The adjustment of the rear derailleur is designed especially in case you change the wheel for one with a set of sprockets that are positioned differently with respect to the drop out. It is possible to start the procedure for either the rear derailleur or the derailleur from any chainring. Every time either keys 2 or 3 is pressed, the system performs a set displacement of 0.25 mm if you act on the rear derailleur, and approximately 0.1 mm if you act on the derailleur. When you have completed the adjustment phase, the system will correct the established positions of all chainrings based on the new settings.

- Zero Settings: The procedures to reset the rear derailleur and derailleur to zero are essential for the system to function.
These procedures allow the system to learn the reference positions of the chain on the sprockets and chainrings, which will be used to calculate the positions that need to be used in all operating conditions. During the resetting to zero phase the movements of the rear derailleur and derailleur occur continuously, and not through set movements as during adjustment, and they depend on the pressure time of levers 2 and 3. The position can be changed by even just a hundredth.

Do you love bike? Get your Campagnolo Chorus Eps Interface and enjoy your leisure activities with the security and confidence which Campagnolo gives you. Don´t forget that we have an great range of Spare parts for all sizes and weather conditions. In order to give you the most effective bike models possible, most of our Transmission items have been designed in collaboration with the pros!