Fox 36 Float Grip 2 HSC/LSC/HSR/LSR QR 15 x 110 mm 44 Offset MTB Fork

Automatic translation Original description available here

With all new design inside-and-out, plus an unmatched combination of smooth performance, tunability, stiffness, and lightweight–we took the award-winning, EWS favorite and made it even better.

- Floating axles might look similar to other axles, but in fact they offer a distinct performance advantage due to their unique ability to match the exact width of the fork’s wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs. Floating axles provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality. The all-new 36 and 38 come equipped with a new quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release. With this system, spacing is locked in via a floating sleeve, allowing repeated front wheel removal and reinstallation while maintaining perfect fork alignment. Floating sleeve positioning comes preset from the factory so if you are unsure of how to operate the floating axle system or simply don’t want to bother with it, you can just install the front wheel and get on with your ride Available optionally is the new Kabolt-X, a lightweight bolt-on floating axle exclusively for the all-new 36 and 38 that not only shaves grams but also increases torsional stiffness via its sleeveless, single-sided pinch bolt design. Chassis alignment must be reset each time the front wheel is removed and reinstalled on both the Kabolt-X and 40 floating axles, but the end result is the same – perfect alignment and perfect performance.

- As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Our lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel.
- BLEEDERS: Our lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button. Pressure build-up in the lower legs dramatically decreases fork performance, preventing full travel from being achieved, and diminishing small bump sensitivity and responsiveness.
- LOWER LEG ARCH: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. Our all-new lower leg design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding.
- GRIP2: Our GRIP2 damper is the benchmark for unparalleled ride quality and ultra-precise on-the-fly adjustability. For 2021, we’ve taken GRIP2 to the next level by adding our patented VVC technology to the high-speed compression circuit.
- FLOAT EVOL: EVOL technology increases negative air spring volume, optimizing small bump sensitivity. EVOL’s linear spring curve delivers plushness off the top, extra mid-stroke support, and more tunable bottom-out progression.

“Factory” says it all – feature-packed and designed to exceed the demands of our Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat.


Specifications:

- Wheel Size:27.5
- Travel:160
- Rake:44
- Axle:15QR x 110

- Upper Tube Finish:Kashima Coat
- Air Channels:Yes
- Bleeders:Yes
- Floating Axle:Yes
- Rotor Size:180 direct Post Mount, Up to 230 compatible
- Mud Guard Mount:Optional FOX 36/38 Mud Guard with sturdy 4-point direct-mount attachment
- Air Spring:FLOAT EVOL
- Steerer:1.5 Taper
- Starting Weight:1965 g



Now you can place your order without having to leave your house with bikeinn, your online store specialized in bike material. We want you to enjoy your leisure time in a unique way and so we offer the biggest selection in Forks products of Fox. Inquire the bike products that are listed like Fox 36 Float Grip 2 HSC/LSC/HSR/LSR QR 15 x 110 mm 44 Offset MTB Fork designed to give you complete comfort while you are exercising your favourite sport or your daily activities.

Click on the following link to get more information about:

Specifications

Click on the following link to get more information about:

Manual

Size chart