`Remember me on this computer` option
Select the `Remember me on this computer` option if you wish to be automatically logged on to the computer in future. Your account will remain active for 45 days. Please do not use the `Remember me` option if using a computer with public access or that is used by more than one person.
View more related products to:
Its new design completely integrates the blade for unrivaled aerodynamics. Equipped with body and blade, the Blade is available in a Ti version (titanium spindle) that weighs a mere 95g per pedal, or in a CrMo version (chromoly spindle) for a weight of 110g per pedal. It is available in three tension release levels: 12,16 and 20.
OPTIMIZED SPINDLE: MORE POWER TRANSFER AND RELIABILITY
The spindle of the new BLADE has been completely redesigned. It is built around an oversized axle and spindle that pass through internal roller and needle bearings located directly under the pedal platform. This new construction allows a gain of approximately 2 to watts at 100 rpm.
The distance between the roller and needle bearings has been increased by 25%. This provides more rigidity along the entire length of the spindle, and as a consequence, improved power transmission.
Special attention has also been given to ensure that it is water resistant. Weather resistance has been improved by 120% for even more reliability and longevity. To accomplish this, the new spindle received an updated endplug with an o-ring washer and has also been equipped with an internal, double-lipped seal.
LOOK axles are only approved after a rotational test of 2 million cycles at 100 rpm with a load of 90 kg on the center of the pedal and an eccentric rotation (which creates stress on each revolution). This is equivalent to a sprint by André GREIPEL of 1700 watts at 100 rpm for 333 hours! This test is much more demanding than the current standard, the ISO 4210.
To meet the demands of the most demanding cyclists, especially competitors, the pedal-cleat system must allow efficient power transfer thanks to a broad and rigid platform.
The platform of the BLADE is fitted with a 67mm-wide stainless steel plate, optimizing the cleat/pedal contact areas, regardless of pedaling angle.
With 700 mm² of surface area, the BLADE offers an optimized contact platform for an efficiency and power transfer that is unmatched on today?s market.
Its weight / power ratio positions it well above the competition
BODY AND BLADE TECHNOLOGY
Using a body lightens the weight of the pedal and provides an additional gain in stiffness for improved power transfer.
BLADE technology is a major technical innovation in the history of the automatic pedal because of its many benefits: LIGHTWEIGHT, AERODYNAMIC, ULTRA-SECURE WHEN CLIPPING IN AND OUT
SPINDLE Chromoly Steel +
THREADING 9/16 X 20 mm
BEARINGS 1 roller bearing, 1 needle bearing
STACK HEIGHT 14.8 mm
DISTANCE PEDAL SPINDLE / CRANKARM 53 mm
PLATFORM WIDTH 67 mm
PLATFORM SURFACE AREA 700 mm²
TENSION Pedals come installed with ?12? blades + additional ?16? blades; (?20? blades sold separately)
CLEATS Kéo Cleats-Gray
FLOAT 0 °, 4.5 ° or 9 ° according to the cleat color (Black, Grey, Red)
PEDAL WEIGHT 110 gr (288 gr per pair with cleats and screws)
ACCESSORIES 2 sets of blades +1 pair of Kéo Cleats-Gray + screws
At the bike store, bikeinn, you can find different sizes of Look Keo Blade CR 12 and in the different colors . In addition, you can also complete your order with products related with Look Keo Blade CR 12 or the category Components from our online bike store. Read our expert advice guides about bike equipment and also the Look Keo Blade CR 12 reviews.
Write a review or ask our dedicated team of experts a question
EASY & FAST RETURN
SECURE & SAFE