`Remember me on this computer` option
Off road: Riding at lower pressure means better performance ... but at the same time it increases the risk of failures. The limit so far is at about 20 psi, below which its hardly possible to dare to ride normal MTB tires.
But nothing stays the same: In the future, air pressure can be controlled in the tires double chambers. In the outer chamber, the air pressure is extremely low - ideal for maximum off road performance. In the inner chamber, directly on the rim, there is high air pressure ? even a very strong impact cannot dent the rim edge. At the same time, the inner high-pressure system secures the tire onto the rim. "Burping", the dreaded loss of air at low pressure in conventional tubeless systems, is impossible.
Tire pressure can be reduced to a minimum 14 psi, thus providing a huge amount of grip. E
ven on the roughest terrain tires "stick" to the ground.
The tire provides extremely sensitive cushioning. Due to the extra cushioning and traction there is much better steering, braking and traction control.
No more risk of snake bites. The rims are extremely well protected from denting. Even in the toughest conditions, significantly lighter tires can be used.
Excellent emergency running characteristics due to the internal high-pressure air chamber.
- Procore can be used with any tubeless MTB tire: Weighing ca. 200 g per wheel. Compatible with all wheels regardless of brand. Internal rim width of 23mm. Series production is underway. Sold as a set of 2 with all necessary components, in order to convert a complete bike. Later on components will also be individually available as replacement parts.
Discover the full range of bike products from Schwalbe that we have in stock and at the best price. At bikeinn, your online bike store allows you to buy online our top product Schwalbe Procore Pack 26 inches from your house with all the guarantees of sending within 24/48h.
Works like a charm but difficult to fit
Matt - 02/02/2016
Watch the video - chick fits the system with ease. Watching me try to do it - exercise in frustration I have fairly deep hookless carbon rims and admittedly bonty tyres are difficult to fit anyway but this was ridiculous. Losing the ability to use the centre channel of the rim when rolling the 2nd bead over the rim edge made fitting the tyres next to impossible. In the end, broke 2 levers (never even used a lever before!) and had the LBS fit them with a tyre press. And they struggled! First shop I went to couldn´t even do it. The system works great, does what it says on the box, but be ready for some serious battles if you have deep or difficult rims to start with. Highly recommend easy to fit tyres with more flexible sidewalls than bontys too.
Write a review or ask our dedicated team of experts a question
EASY & FAST RETURN
SECURE & SAFE
RECOMMENDED FOR YOU