Shimano 105 R7000 Hollowtech II 110 BCD Crankset

Automatic translation View in original language

Do you have Shimano Cranksets With 105 R7000 Hollowtech Chainrings in stock in 165 mm length? I only see the measurement of 170 mm, could you get the measurement of 165mm?

Cuentan con existecia Shimano Bielas Con Platos 105 R7000 Hollowtech en longitud de 165 mm? Solo veo la medida de 170 mm, podrían conseguir la medida de 165mm?

Answer of Antonino Lo Baido

Answer of Arnaud

NO it is not available in this size of cranks

NON ce n´est pas disponible dans cette dimension de manivelles

Automatic translation View in original language

Does it bring the bottombracket?

Trae el bottombracket ?

Answer of Alfonso De la Hoz Moreno

Answer of Erick

Hello, it doesn´t have that

Hola no cuenta con eso

Answer of Arnaud

yes the crankset is complete: 2 cranks, axle, and chainrings

oui le pédalier est complet : 2 manivelles, axe, et plateaux

Automatic translation View in original language

Good morning, is this crankset compatible with a 10v Ultegra gearbox??

Buongiorno,questa guarnitura è compatibile con un cambio Ultegra a 10v??

Answer of Marcello Cafiero

Answer of José

It is not compatible. It may work if you have no other alternatives, but it is not advisable.

Não é compatível. Poderá funcionar no caso de não ter mais alternativas, mas não é aconselhável.

Answer of Matteo

The 105 R7000 crankset is suitable for 11-speed transmissions but with the appropriate adjustments it can also work with 10-speed transmissions

La guarnitura 105 R7000 è indicata per trasmissioni a 11v ma con le opportune regolazioni può funzionare anche con trasmissioni a 10v

Answer of Bruno

Good. It is compatible with 10v but it will not work at 100%, due to the thickness of the current.

Boas. E compatível com 10v mas não vai ficar a trabalhar a 100%, por causa da espessura da corrente.

Automatic translation View in original language

Is the bottom bracket axle standard? If so, what is its diameter? THANK YOU .

L'axe du pédalier est-il standar ? Si oui quelle est son diametre . MERCI .

Answer of Alexander Weinstock

Answer of Arnaud

Yes the axle is standard, with a diameter of 24mm, to be installed with SM-BBR60

Oui l´axe est standard, avec un diamètre de 24mm, à installer avec SM-BBR60

Automatic translation View in original language

Good morning, is the left crank arm also included in the crankset?

Buongiorno, nella guarnitura è compresa anche la pedivella sinistra?

Answer of Carlos Maia

Answer of Mónica

Hello! Yes, I received the two connecting rods. I bought it three months ago.

Hola! Sí, yo recibí la dos bielas. Lo compré hace tres meses.

Answer of Arnaud

Yes the pedal set is complete: right + left

Oui le pédalier est complet: droit + gauche

Answer of Abel Iván

Hello, the left connecting rod is included.

Hola, la biela izquierda si se encuentra incluida.

Answer of Astur

That´s right. Both come in the game.....

Eso es correcto. Ambas vienen en el juego.....

Answer of José

Yes, it is included. I bought this product and the set came.

Sim, está incluído. Comprei este produto e veio o conjunto.

Answer of Matteo

Certainly! There is a crankset with right side chainrings and left crank arm

Certamente! È presente guarnitura con corone lato destro e pedivella sinistra

Automatic translation View in original language

Good morning, I would like to know if the 105 R 7000 11v crankset is compatible with the Ultegra 10v drivetrain. At the moment I have an FSA SLK 170mm crankset. Thank you

Buongiorno, vorrei sapere se la guarnitura 105 R 7000 11v è compatibile con la trasmissione ultegra 10v. Al momento monto una guarnitura fsa slk 170mm. Grazie

Answer of Marcello Cafiero

Answer of Carlos

Hello, good. I have it mounted with a 10v 105 and it is not bad, but the adjustment has to be much more precise and logically with a 10v chain. Hence the precision of the adjustment. I hope I have helped you.

Hola buenas.yo lo tengo montado con un 105 de 10v y no va mal,pero el ajuste tiene que ser mucho mas preciso y logicamente con cadena de 10v.de ahi la precisión del ajuste..espero haberte ayudado

Answer of Matteo

Theoretically it is compatible with 10-speed groupsets. the problem could be with the derailleur because it is wider than the 11-speed ones

Teoricamente è compatibile con gruppi 10 velocità. il problema potrebbe esserci con il deragliatore perché più largo rispetto a quelli a 11 velocità

Answer of Bruno

Good afternoon. It is compatible but does not work at 100% as if it were 11v.

Boas tardes. E compatível mas não fica a trabalhar a 100% como se fosse de 11v.

Automatic translation View in original language

What chain length for a 52/36 crankset and an 11/32 or 34 cassette? THANKS.

Quel longueur de chaîne pour un pédalier 52/36 et une cassette 11/32 voir 34? merci.

Answer of Juan Elio

Answer of Arnaud

I think 108 links

je pense 108 maillons

Answer of Alberto

the length of the chain must be determined with the components mounted, then you need to see if the mounted gearbox has a long cage to be able to use the mounted gears otherwise you may have problems with crosses like 52/32-34 or 36/11

la lunghezza della catena va fatta a componenti montati, poi bisogna vedere se il cambio montato ha la gabbia lunga per potere utilizzare i rapporti montati altrimenti si possono avere problemi con incroci tipo 52/32-34 o 36/11

Automatic translation View in original language

Hello good Morning. Is it compatible if I wear Ultegra FC6800 model? It's for a megamo raise 2017

Hola bon dia. És compatible si Porto model Ultegra FC6800? És per una megamo raise 2017

Answer of Antonio Rego

Answer of Arnaud

Yes it is compatible with shimano 11s, so 6800 OK

Oui c´est compatible avec shimano 11s, donc 6800 OK

Automatic translation View in original language

Hi, Is this compatible with the Cannondale BB30? And, in that case, which bearing or adapter must I use?

Hei, Er denne kompatibel med Cannondale BB30? Og, hvilket lager eller adapter må jeg i så tilfelle bruke?

Answer of Carlos Andres Rios Varela

Answer of Astur

It is not compatible with the Bottom Bracket BB30 (bottom bracket or motor). The axis of the Shimano 105 crankset is 24mm, therefore, to install them on the Cannondale you must change the bottom bracket or motor for one that allows an internal axis of 24mm (the BB30 is 30mm).....

No es compatible con el Bottom Bracket BB30 (pedalier o motor). El eje del juego de bielas 105 de Shimano es de 24mm, por lo tanto, para instalarlas en la Cannondale debes cambiar el pedalier o motor por uno que permita un eje interior de 24mm (el BB30 es de 30mm).....

Answer of Alberto

Hi no. You would have to change the cups for 24mm axles, the bb30 are for 30mm axles.

Hola, no. Tendrias que cambiar las cazoletas para eje de 24mm, las bb30 son para ejes de 30mm.

Automatic translation View in original language

Good morning, is it compatible with the pressfit bb86/92 bottom bracket? Thank you

Buenos días, ¿es compatible con caja pedalier pressfit bb86/92? Gracias

Answer of Antonio Rego

Answer of Erick

Hello, it is not compatible. The ideal is to install this crankset with a cage type SM-BBR60, length 68 mm, internal diameter 24 mm, so that the BB86/92 is compatible. greetings

Hola no es compatible. Lo ideal es instalar este juego de bielas con una caja tipo SM-BBR60, longitud 68 mm, diámetro interno 24 mm, para que el BB86/92 sea compatible. saludos

Answer of Alfonso

You don´t have to put the Shimano bbr60 on it

No Tienes que ponerle el de Shimano bbr60

Automatic translation View in original language

This crankset is compatible with shimano durace 10s

Questa guarnitura è compatibile con shimano durace 10v

Answer of Antonio Rego

Answer of Arnaud

no, only 11-speed compatible

non, uniquement compatible 11 vitesses

Answer of Alfonso

If it is compatible, it will work perfectly for you,

Si es compatible , te va a funcionar perfectamente,

Automatic translation View in original language

Hi do you have the Shimano 105 R7000 ring?

Ola você tem o anel Shimano 105 R7000 ?

Answer of Dani Ripoll Alsina

Answer of Alfonso

Hello, https://www.tradeinn.com/bikeinn/en/shimano-plate-105-r7000-hollowtech-ii/137973546/p https://www.tradeinn.com/bikeinn/en/shimano-plate-105 -r7000-hollowtech-ii/137973547/p Regards

Hola, https://www.tradeinn.com/bikeinn/es/shimano-plato-105-r7000-hollowtech-ii/137973546/p https://www.tradeinn.com/bikeinn/es/shimano-plato-105-r7000-hollowtech-ii/137973547/p Saludos

Answer of Matteo

The 105 R7000 crankset does not come with any rings or spacers. There is a gasket ring on the left crank arm.

La guarnitura 105 R7000 non è fornita di alcun anello o spacer. È presente un anello-guarnizione sulla pedivella sinistra.

Automatic translation View in original language

I have a Shimano 105 5800 11v with SM BB71 41 system mounted. Would these cranks be compatible?

Tengo montado un Shimano 105 5800 de 11v con sistema SM BB71 41. Serían compatibles estas bielas?

Answer of Alex de Vries

Answer of Arnaud

This crankset will be mounted with the SM-BB72-41B box

Ce pédalier se montera avec le boitier SM-BB72-41B

Automatic translation View in original language

Hello. The Shimano R7000 cranks are compatible with Shimano R 5800. I mean if the same chainring is used

Hola. Las bielas Shimano R7000 es compatible con Shimano R 5800. Me refiero si sirve el mismo padalier

Answer of Alex de Vries

Answer of Arnaud

YES it is compatible, shimano 11v

OUI c´est compatible, shimano 11v

Automatic translation View in original language

Hi, is it compatible with this: FSA BB86 Composite Cup Bottom Bracket - BB-CF86/SLE/CZ?

Hi, is it compatible with this: FSA BB86 Composite Cup Bottom Bracket - BB-CF86/SLE/CZ?

Answer of Alex de Vries

Answer of Arnaud

What is important is the diameter of the bottom bracket axle of 24mm

Ce qui est important, c´est le diamètre de l´axe du pédalier de 24mm

Automatic translation View in original language

Hello. Could you tell me the difference between the 50/34 T and 50/34 D cranks?

Hola Podría decirme la diferencia entre las bielas 50/34 T y las 50/34 D ?

Answer of Alex de Vries

Answer of Arnaud

None, T = teeth = dents = D

Aucune, T = teeth = dents = D

Answer of Alberto

nothing, indicates the number of teeth in English or Italian/Spanish. (teeth/dientes)

nulla, indica il numero dei denti in inglese o italiano/spagnolo. (teeth/dientes)

Automatic translation View in original language

Hello, I would like to know if the right and left crank is included or only left?

Buongiorno vorrei sapere se è inclusa pedivella destra e sinistra o solo sinistra?

Answer of Antonino Lo Baido

Answer of Arnaud

The crankset is delivered complete: 2 cranks and chainrings of your choice

Le pédalier est livré complet: 2 manivelles et plateaux au choix

Answer of Alberto

pair, right + left

coppia , destra + sinistra

Answer of Antonino

You receive both left and right crank arms.

Si ricevono entrambe le pedivelle destra e sinistra.

Automatic translation View in original language

Hi is this crank compatible with a 24mm spindle diameter and BB86/92?

Hi is this crank compatible with a 24mm spindle diameter and BB86/92?

Answer of Antonino Lo Baido

Answer of Arnaud

The ideal is to install this crankset with a case type SM-BBR60, length 68mm, internal diameter 24mm => so the BB86/92 is compatible

L´idéal est d´installer ce pédalier avec un boitier de type SM-BBR60, longueur 68mm, diamètre intérieur 24mm => donc le BB86/92 est compatible

Answer of Alberto

with adapters yes, it´s 24mm but for outer shells

con adattatori si, è 24 mm ma per calotte esterne

Automatic translation View in original language

Hi, is R7000 compatible with Ultegra 6800 (11sp),? Ultegra crank broke and plan to replace with complete R7000. Thankss

Hi, is R7000 compatible with Ultegra 6800 (11sp),? Ultegra crank broke and plan to replace with complete R7000. Thankss

Answer of Antonino Lo Baido

Answer of Arnaud

Yes compatible, what matters is the bottom bracket, and they are identical for these 2 models

Oui compatible, ce qui compte c´est le boitier de pédalier, et ils sont identiques pour ces 2 modèles

Automatic translation View in original language

Hello. I have broken my crankset Shimano Ultegra FC-6800 50 × 34 T, is the Shimano 105 R7000 Hollowtech II 110 BCD Crankset compatible? Just a commuter so looking to keep costs down. Thank you.

Hello. I have broken my crankset Shimano Ultegra FC-6800 50 × 34 T, is the Shimano 105 R7000 Hollowtech II 110 BCD Crankset compatible? Just a commuter so looking to keep costs down. Thank you.

Answer of Antonino Lo Baido

Answer of Arnaud

yes completely compatible, what matters will be the SM-BBR60 bottom bracket for example

oui tout à fait compatible, ce qui compte sera le boitier de pédalier SM-BBR60 par exemple

Automatic translation View in original language

Hello, Is the Shimano 105 R7000 Hollowtech II 110 BCD Crankset an 11 speed? Thanks.

Hello, Is the Shimano 105 R7000 Hollowtech II 110 BCD Crankset an 11 speed? Thanks.

Answer of andrea cerati

Answer of Erick

Hello good day, if it is 11 speed Greetings

Hola buen día, si es de 11 velocidades Saludos

Answer of Alessio

Hi, yes, 11 speeds.

Ciao, sì, 11 velocità.

Automatic translation View in original language

Hello. I have destroy my crankset Shimano Dura-Ace FC-9000 HollowTech II 52 × 36 T I just want to know if Shimano Pedaleira 105 R7000 Hollowtech II 110 BCD are compatible. Thank you.

Hello. I have destroy my crankset Shimano Dura-Ace FC-9000 HollowTech II 52 × 36 T I just want to know if Shimano Pedaleira 105 R7000 Hollowtech II 110 BCD are compatible. Thank you.

Answer of Antonio Rego

Answer of Erick

Hello good day, they are compatible, greetings

Hola buen día, son compatibles, saludos

Automatic translation View in original language

I would like to know if it comes with the bottom bracket. Also if they invoice and how many days it would take to arrive in Mexico, any personal contact with whom to contact me?

Quisiera saber si viene con el Bottom bracket. También si facturan y cuantos días tardaría en llegar a México, algún contacto personal con quien contactarme?

Answer of Antonio Rego

Answer of Erick

Hello, good day, it only includes connecting rods and multiplication and two chainrings, if they invoice but they do not itemize it, since the tax is assigned by customs when it arrives in Mexico, it takes 15 business days to receive the products. Regards

Hola buen día, solo incluye bielas y multiplicación y dos platos, si facturan pero no desglosan iba Ya que el impuesto lo asigna la aduana cuando llega a México 15 días hábiles para recibir los productos saludos

Automatic translation View in original language

All cranks come with a cup and are standard for any road bike.

Todas la manivelas vienen con cazoleta y son estándar para cualquier bicicleta de carretera

Answer of Antonio Rego

Answer of Erick

Hello, the cranks do not include reducers or cases, and are only compatible with the specifications that indicate either bcd or bb30, etc. depending on the bicycle and brand it is compatible.

Hola las bielas no incluyen ni reductores ni casoletas, y solo son compatibles con las especificaciones que indican ya sea bcd o bb30 etc según la bicicleta y marca es compatible

Automatic translation View in original language

Why is there no choice of 172.5 and 175 mm. When you put on one of these indicators, there is no choice of the number of teeth.

Why is there no choice of 172.5 and 175 mm. When you put on one of these indicators, there is no choice of the number of teeth.

Answer of Antonio Rego

Answer of Erick

Hello, in the menu, if there are options for the size of the connecting rods and the chainrings, if they are in pairs, that is, 52.36 and 53.39, if there is no option, it is because the product may not be in stock. Greetings

Hola en el menú si hay opciones del tamaño de las bielas y los platos si están por pares es decir 52,36 y 53,39 si no da opción es porque tal vez no hay en existencia el producto saludos

Automatic translation View in original language

Hello is the left crank included? Sportingly

Bonjour la manivelle gauche est-elle inclue? Sportivement

Answer of andrea cerati

Answer of Alessio

Yes of course, the left crank arm is also included.

Si certo, è inclusa anche la pedivella sinistra.

Automatic translation View in original language

Salutations. I would like to know if the article is compatible with the ultegra 6700 10V group

Salve. Vorrei sapere se l'articolo è compatibile con il gruppo ultegra 6700 10V

Answer of Enrique Mesta

Answer of Lukasz

new Shimano 105 (R7000) is 11 speed, however you have to read about compatibility on internet, some people mix and say that FRONT cranks 10s and 11s work well. (both with only 2 chainrings, and they work with 10-11s chains)

new Shimano 105 (R7000) is 11 speed, however you have to read about compatibility on internet, some people mix and say that FRONT cranks 10s and 11s work well. (both with only 2 chainrings, and they work with 10-11s chains)

Automatic translation View in original language

Hi, I would like to know the number of teeth of the chainrings, if it is 10 or 11 and if the article is compatible with Shimano Ultegra 6700. Thanks in advance

Salve, vorrei sapere il numero del denti delle corone, se è 10 o 11 v e se l'articolo è compatibile con Shimano Ultegra 6700. Grazie in anticipo

Answer of Enrique Mesta

Answer of Feliciano

Hello, it is for 11v, you have the compact 50/34, 52/36 and 53/39. If it is compatible, check it on the shimano website.

Hola es para 11v, tienes el compac 50/34, 52/36 y 53/39. Si es compatible consúltalo en la web de shimano.

Automatic translation View in original language

Is the bottom bracket included with the cranks and chainrings? Thanks.

El pedalier va incluido con las bielas y los platos? Gracias.

our experts answer

Hello! The bottom bracket is not included. Regards.

¡Hola! El pedalier no está incluido. Saludos.

Automatic translation View in original language

This is my first time to join in this online for now I will give 75% percent rating.

This is my first time to join in this online for now I will give 75% percent rating.

our experts answer