Yeti SB130 29´´ 2021 MTB Frame

Automatic translation Original description available here

Features:

- Long Reach: Puts riders in a balanced position perfectly centered on the bike, ready to tackle the unknown.
- 150MM FORK: Because our 130mm of rear suspension outperforms similarly stroked forks and pairs well with our more forward biased position.
- FRONT END DOESN´T WANDER CLIMBING: And stays composed when pointed downhill – the rider position remains neutral.
- LOW SLUNG. LONG DROP: Long stroke dropper post capability throughout entire size range — for greater agility.
- AT HOME WHEN YOU´RE NOT: The deeper you go, the higher you climb, the later you brake, the more comfortable SB130 becomes. Bottom line, the term “trail bike” gets used pretty liberally at Yeti.
- LEVERAGE RATE: The patented Switch Infinity has been laid out to have supple small bump compliance but ramp up quicker in the mid-stroke while still allowing for bottom-out control with a 12% progressive leverage ratio. A straighter, more linear progression curve means it’s easier to tune shocks to pair with the suspension kinematics, and we don´t have to rely on damping circuits to compensate. Being able to manipulate the leverage rate without affecting the anti-squat characteristics is unique to our patented Switch Infinity suspension. What does this mean with 6k of vert behind you on the day? You’ll have more left in the tank to grab another 6k of vert, up or down. That’s the SB130’s best trait.
- PROGRESSIVITY: 12% How it performs matters far more than the % on a chart. But if asked by a Tribe member, now you know.
- FEEL: Big mountain feel, capable, lively, with a centered rider position.
- BALANCE ACHIEVED: Refined for the unknown and everything in between the SB130´s Switch Infinity provides more progressive ride without effecting the anti-squat properties.
- ANTI-SQUAT: Across our line, we have chosen a relatively flat and high anti-squat curve in beginning and mid-section of travel where pedaling commonly occurs a.k.a the pedaling zone. This creates an efficient pedaling platform through your entire pedaling zone, there is an inflection point where the Switch Infinity link moves down, dropping the anti-squat drastically. Riders are typically not pedaling in this zone, so chain forces have less of an effect on the suspension performance. Decoupling of the chain forces allows the suspension to work more efficiently to absorb impacts making the feel of a Yeti distinct.
- SILENCE IS TURQ: Internally routed cable tubes from end to end for silent function. And less translation of housing during suspension movement.


LUNCH RIDE KIT IS MORE THAN JUST A NAME:

- FRONT FORK TRAVEL: 10 More millimeters of fork travel. It never hurts to go bigger on your gear when you’re going bigger out there. Lunch Ride kits get a 160mm Grip 2 damper fork so riders can dial in their suspension and get the most performance out of their suspension and most of the terrain.
- REAR WHEEL TRAVEL: 7 More millimeters of rear travel. 7mm might be small to others, but to mountain bikers it’s the difference in “will you?” and “hell yes!” Pair this 7mm to the bigger front fork and the already capable SB130 starts to give its bigger sibling a run for the money.
- SLACKER HTA: 0.5 Slacker headtube for bigger terrain. Lengthen the fork and you slacken the head angle by half a degree. What you get is a bike that exudes confidence no matter what you choose to descend so you can push longer, faster, and further into the unknown.
- COMPONENT SPEC CHANGES: 8 More than just added travel we wanted to enhance the whole package. Wider bars, bigger rear rotor, beefier tires, burlier wheels, and more powerful brakes. LR isn’t just a spec change. It’s a mindset shifter. Eight total spec differences make sure the Lunchride is ready for anything the trail throws at it. It’s up to any task. Are you?

Buid Kits:

- Frame: TURQ Series carbon fiber frame, Switch Infinity suspension technology, press-fit BB92, internally tunneled cable routing, 148mm x 12mm BOOST dropouts, sealed enduro max pivot bearings, integrated derailleur hanger, and axle.
- Material: TURQ SERIES
- Weight: 6.90
- Travel: 130MM (5.1´´)
- Rear Shock: FOX FACTORY DPX2, 210 x 52.5MM



Discover all the Bikes and frames products that you can find at bikeinn like Yeti SB130 29´´ 2021 MTB Frame. Buy now Yeti SB130 29´´ 2021 MTB Frame and save a lot of money on Mtb frames products. In addition, with the quality that is backed up by the brand Yeti it will be the perfect purchase. Do you already know that you can find Yeti SB130 29´´ 2021 MTB Frame and other sports in our bike store? Thanks to bikeinn, you can now see a massive choice of Bikes and frames item ideal for every sport imaginable.

Click on the following link to get more information about:

Specifications

Click on the following link to get more information about:

Manual

Size chart