Cannondale Wheel Sensor Mounting Adapters

The Wheel Sensor utilizes a two part Mounting Adapter system to mount to different hub/wheel types. See page 3 Mounting Adapter Compatibility. Adapter identification marks are molded into the Rubber Adapter Mount and Adapter Clamp.
- Use of unspecified adapter combinations could result in damage to the Wheel Sensor and/or to the wheel or in dislocation of the Wheel Sensor.
- Sensor must be mounted vertically against the inside of the spokes on the non-drive side of the front wheel and have contact with two spokes. However, when riding indoors, the sensor can be moved to the non-drive side of the rear wheel using the 0A adapter. This may result in the sensor being slightly tilted, which will not affect its function. Mounting the sensor in any other orientation will result in a less-accurate reading of speed and distance.
- Position the Wheel Sensor and secure as close to the hub axle as possible with the curved bottom surface matching the hub’s radius.

Required Tools: Safety Eye Glasses, Shop Work Gloves, Hex Key: 2 mm, Torque Wrench

Compatibility: Some wheels are not compatible with the Cannondale Wheel Sensor. Please consult your Cannondale Dealer to answer any questions regarding compatibility.

ADAPTER:
0A
- For wheels not listed below. Must be secured around an inboard spoke with the sensor body contacting a second inboard spoke.
NOTE: Can can be used to mount the Wheel Sensor to rear wheels for use on indoor trainers.
NOTE: Does not have Adapter Identification marks. Is the only Adapter Mount made of plastic and not rubber. 0A Spoke Camp is the smallest of the Spoke Clamps.
NOTE: On straight pull hub/wheel combinations not listed use kit 0A if Mount Adapter 2B or 3B does not work.

2A
HollowGram KNØT hubs only

2B
- 2-cross lacing patterns with the trailing spoke on the INSIDE of the flange
NOTE: If Spoke Clamp does not fit the spoke angles, use Mounting Adapter 0A

3A
HollowGram 35 hubs, straight pull

3B
3-cross lacing patterns with trailing spoke on the INSIDE of the flange
NOTE: If Spoke Clamp does not fit between spoke cross and hub flange use Mounting Adapter 0A

3C
Straight pull, Lefty 60 hubs

If you are looking for a good quality Accessories article, then our range of Accessories will definitely meet your expectations. We recommend you Cannondale Wheel Sensor Mounting Adapters, the price is 26.99 $ and is available. bikeinn is the best option to buy your bike equipment at the best price. If you find a lower for Cannondale Wheel Sensor Mounting Adapters, publicly available price anywhere else, we´ll match it!