Speedbox Bosch 1.1 Delimiter

The chip for e-bikes with the latest Bosch 4th Generation motor and Smart System.

SpeedBox 1.1 allows you to suppress the speed limiter of your electric bike.

If you want to see the correct speed and all the driving data during your ride, we recommend that you choose SpeedBox 1.1 B.Tuning for Bosch.

With SpeedBox 1.1 B.Tuning for Bosch, you can see the actual values in our SpeedBox app, directly on the screen of your phone.

PROPERTIES:-Maximum speed:Unlimited (recommended maximum 35 km/h).

-Speed limit setting:YES.

-Activation/deactivation (do not perform while driving):WALK function / - + - - +.

-Tuning activation/deactivation indication:YES (3.5/2.5 km/h).

The display shows:

-Actual speed:NO.

-Correct distance travelled:After the countdown process has finished.

*Compatible with:

-Displays:Smart System.

-Engines:Smart System.

*Not compatible.

-*With E-bikes that have a magnet attached to a valve (Bosch Rim Magnet).

-ABS System.

-SpeedBox App.

*Important note:Do not update the E-bike software to version 5.17 until further notice.

Installation and use:-Click here for video installation.

Important:-Connect the male - female connectors in the direction of the lock - do not turn the connectors during connection!.

* FOLLOW THE FOLLOWING STEPS IN CASE YOU HAVE TO UPGRADE THE SOFTWARE OF YOUR E-BIKE ( In case of upgrading it will be at your own responsibility ).

1) Uninstall SpeedBox from the e-bike.

2) Update the software.

3) Reinstall SpeedBox.

How does SpeedBox 1.1 for Bosch work?.

To correctly activate all SpeedBox functions, you need to access the menu after the first switch-on of the electric bike after the installation of the tuning and switch to the wheel circumference of your electric bike.

Activate/deactivate the setting before riding (when the e-bike is stationary), not while riding!.

You activate the SpeedBox 1.1 setting directly on the control unit of your e-bike by briefly activating the WALK assist function (by pressing and holding the ´´ - ´´ button).

The display of your electric bike will show a value of 3.5 km/h (2.2 mph) and from now on you can ride up to 35 km/h or more.

However, we recommend that you do not exceed 35 km/h (22 mph).

To deactivate the tuning, briefly re-activate the WALK assistance function (by pressing and holding the ´´ - ´´ button).

The display on your e-bike will show a value of 2.5 km/h (1.6 mph) and the speed limit will be reset to 25 km/h (16 mph).

Your electric bike will operate as it did before the installation of the tuning.

SpeedBox was also designed for e-bikes that do not have the WALK assistance function enabled or activated.

In this case, you can activate/deactivate the tuning by switching twice between two assistance modes, i.e.

by pressing the - + + - + buttons.

You can set the maximum speed limit by switching modes from TURBO mode three levels down and then three levels up :eMTB - TOUR+ - ECO - TOUR+ - eMTB - TURBO.

After that, an actual speed limit will be displayed.

The maximum speed of an electric assistance can be changed by briefly activating/deactivating the WALK assistance function or by turning the rear wheel 360°.

The value of 2.5 km/h on the display corresponds to the 25 km/h limit, 3.0 corresponds to 30 km/h, 3.5 corresponds to 35 km/h, etc.

The last displayed limit will be saved after 15 seconds of inactivity.

After finishing the ride, leave the electric bike on for a while until the SpeedBox finishes the ´´countdown´´ process (the ride time will continue on the display until it stops and shows the correct distance travelled) to avoid tuning detection on your electric bike.

bike.

Details.

We use original connectors for the production of SpeedBox chips ensuring that the installation process is very simple and that the chip is connected correctly.

We have also prepared detailed instructions and videos to make the installation easier for you.

Disassembly of the chip is just as easy.

If you have any problems with installation or removal, please do not hesitate to contact us.

If you plan to install SpeedBox on a new bike, be sure to ride it for at least 1 km before the chip is activated.

* NOTICE.

Please note that the use of modified electric bicycles in infrastructure may be in conflict with current legislation in some countries.

The manufacturer is not liable for damages resulting from the use of SpeedBox products.

E-bikes equipped with SpeedBox products may not be used on roads, cycle paths and public areas.

Electric bicycles equipped with SpeedBox products may only be used on your own property, solely at your own risk.

The use of SpeedBox products may void the warranty of your electric bike.

We recommend the use of additional protective products to avoid injury.

Speedbox Bosch 1.1 Delimiter is available in different sizes and colors. If you are interested in purchasing Speedbox Bosch 1.1 Delimiter from your online bike store bikeinn, do not hesitate any longer and received it at home in a few days. At bikeinn you can find the lowest price guarantee for products of bike gear from the brand Speedbox.