Wheels Manufacturing Bearing Extractor 30 mm

6806 (30mm) Sealed Bearing Extractor.

Individual extractor for removing 6806 sealed bearings with 30mm inside diameter.

These bearing extractors grip the inside race of a sealed bearing, allowing the bearing to be tapped out of the hub shell or frame component.

Insert the extractor into the bearing, tighten one side with a matching wrench, and the collet expands to grip the inside of the bearing.

Tap the extractor & bearing out together with a punch and hammer.

All extractors are size specific! If attempting to remove a bearing of a different size than the extractor, you will permanently damage or break the extractor.

If the extractor is smaller than the bearing, try using a shim between the extractor and the bearing to get the tightest fit before tightening the extractor bolt.

Bearing extractor requires the following tools:(1) 17mm open or box end wrench.

(1) 1´´ open end wrench.

(1) Punch (diameter should be smaller than 30mm.).

(1) Hammer

Do not wait any longer and buy Wheels manufacturing Bearing Extractor 30 mm. For any other information about the characteristics of Wheels manufacturing Bearing Extractor 30 mm, you can get in contact with bikeinn through our contact page. bikeinn offers an exclusive collection of Maintenance for bike and other leisure activity. Our Maintenance will ensure you enjoy your sport and daily activity and make your life more comfortable with our unique range of Bearing tools articles.