Zipp R2C Bulb Lever Sram Shifter Set

$ 0

参考価格:

節約金: %

1 レビュー

0 質問

送料無料

組み立て自由

関税を支払う必要はありません。

によって販売および出荷

他のベンダーを見る()

内容量

カラー:

貴方のラケット・ガットを選択して下さい

テンション

ここからのご案内にしたがってビンディングの調節を行ってください:

(カスタム化された商品は返品又は交換できません)

無料！

(カスタム化された商品は返品又は交換できません)

このサイズは在庫切れです

希望を失わないように。メールアドレスを書いておくと、この商品が再入荷した際にメールでお知らせします。

申し訳ありませんが在庫切れです

節約金:

マイパックに追加

クリック1つで今購入

この商品を購入して獲得:

要望リストへ追加

違う色もあります

完璧な組み合わせ

Reportar error

記述 Zipp R2C Bulb Lever Sram Shifter Set

Proven at Kona and in the Tour, the VukaR2C™ aero shifter is a milestone in our efforts to develop cockpit components that combine high-performance aerodynamics with superior ergonomics.

Once you position the lever at the natural angle for your hand position, the VukaR2C´s return-to-center actuation resets the lever to its original angle after every shift, keeping you as low and as comfortable as possible.

Weighing just 180 g per pair, the VukaR2C also is the first plug-in shifter designed with an aerodynamic profile that saves up to 6 seconds over 40 km compared with a standard lever.

The VukaR2C is a plug-in shifter, with two separate versions available to be compatible with SRAM® or Shimano® 10 speed only.

(Please note:You must buy the VukaR2C that is compatible with your brand of drivetrain.) The VukaR2C fits most aero bar extensions but is optimized for use with a new version of Zipp®´s VukaShift extensions.

Note:There are two bolts on the VukaR2C shifters.

One uses a 4 mm Allen wrench and one uses 5 mm Allen wrench.

The 4 mm bolt (see picture) is used to attached the shifter to the shifter boss for installation into an aero bar.

The 5 mm bolt is used to keep the shifter assembly in one piece.

The 5 mm bolt can be loosened to adjust the angle of attack of the shifter lever, but should NEVER be removed.

Removing the 5 mm bolt can cause the shifter to come apart.

VUKA R2C SHIFTERS:There are 2 bolts on the Vuka R2C Shifters.

One uses a 4mm alien wrench and one uses 5mm alien wrench.

The 4mm bolt (see picture) is used to attached the shifter to the shifter boss for installation into an aero bar.

The 5mm bolt is used to keep the shifter assembly in one piece.

The 5mm bolt can be loosened to adjust the angle of attack of the shifter lever, but should NEVER be removed.

Removing the 5mm bolt can cause the shifter to come apart, this will ruin your day.

If you have disassembled the shifter please call Zipp´s technical experts at 1-800-346-2928.

They can help you get the shifter back together.

Specifications:

- Weight:180g - Mechanism:Return to Center (R2C).

重要な注意：左のレバーはフロントブレーキと連動し、右のレバーはバックブレーキと連動します。左のギアシフタはチェーンリングで動作し、右のギアシフタはサイクリングカセットで動作します。

Zipp R2C Bulb Lever Sram Shifter Setのご注文は今すぐどうぞ、わずか数日でお手元に届きます。もちろん様々な好みに合うようにサイズ、色とも豊富な種類の Zipp R2C Bulb Lever Sram Shifter Setをご用意しています。現在 Zipp R2C Bulb Lever Sram Shifter Set は在庫もあり、お値段は0 $です。豊富な品揃えのレベル商品もあわせて購入すれば、必要なアイテムはすべてここで揃います。